Compare products
Compare products
Add at least one product to compare. You can compare up to three products at a time.

Flame Retardant Bib 'n' Brace

50408894

Inherent flame retardant high visibility bib 'n' brace with front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the bib 'n' brace with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld gives you additional protection against welding and grinding splashes at the front. PFAS-free.

EN ISO 11612
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2
EN 61482-2 APC 1 ELIM: 18,0 cal/cm² ATPV: 20,0 cal/cm²
EN ISO 11611
EN ISO 11611 CL.2 A1+A2
EN 13034
EN 13034 type PB[6]
EN ISO 15797
EN ISO 15797 50 WASHES

Colour Yellow/navy

Certifications

 
The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
EN ISO 11612
EN ISO 11612 A1+A2 B1 C1 E3 F1 EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
EN 61482-2
EN 61482-2 APC 1 ELIM: 18,0 cal/cm² ATPV: 20,0 cal/cm² EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
EN 1149-5
EN 1149-5 EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
EN ISO 11611
EN ISO 11611 CL.2 A1+A2 EN ISO 11611 - The standard specifies protective clothing used in welding or allied processes.
EN 13034
EN 13034 type PB[6] EN 13034 - The standard specifies protective clothing that protects against liquid chemicals.
EN ISO 20471
EN ISO 20471 CL.1 EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required.
EN 13758-2
EN 13758-2 EN 13758-2 - The standard specifies clothing that protects against UV radiation.
EN ISO 15797
EN ISO 15797 50 WASHES EN ISO 15797 - The standard specifies procedures for industry laundry and finishing of workwear.
TRANEMO SKINSAFE
TRANEMO SKINSAFE TRANEMO SKINSAFE - Multi-layer system designed to protect against flame, heat and Electric Arc injuries.

Product description

Inherent flame retardant high visibility bib 'n' brace with front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the bib 'n' brace with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld gives you additional protection against welding and grinding splashes at the front. PFAS-free.

Adjustable braces with hidden plastic buckles and elastic in back. Front zip. Chest pockets, one with flap. Concealed knife buttons. Inside pocket. Adjustable width and loops in waist. Side pockets. Cargo pocket with flap, mobile phone pocket, pencil loop and concealed D-ring. Ruler pocket with flap and reinforced base.. Knee pad pockets with two different placement levels. Hip pockets with flap. Contrast stitching. Long and short sizes - will be amended after order. Approximately 5 days extra delivery time.

Washing instructions More care instructions >

Wash at max 60°C
Wash at max 60°C
Do not bleach
Do not bleach
Tumble dry low temprature
Tumble dry low temprature
Ironing max 150°C
Ironing max 150°C
Do not dry clean
Do not dry clean

Quality

885: Cantex Weld - 50% modacrylic / 36% cotton / 12% polyamide / 2% antistatic, 365 g/m²

Inherent Flame Retardant fabric with highest possible protection against molten iron. Suitable for welding and grinding. PFAS-free finish. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.

Show fabric test result Hide fabric test result

EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 C2 (885+920)
EN ISO 11611 class 2
EN 61482-1-2:2014 APC 2
EN IEC 61482-1-1:2019, ELIM: 23 cal/cm², ATPV: 25 cal/cm²
LOI 29,0%
EN 1149-3
EN 13034 (only for acid and alcaline)
EN ISO 20471 for fluorescent yellow
EN 13758-1 UPF 50+

884: Cantex Stretch - 48% modacrylic / 35% cotton / 12% polyamide / 3% elastic fibre / 2% antistatic, 365 g/m²

Inherent Flame Retardant fabric with highest possible protection against molten iron. Stretch fibre in the fabric increases the comfort. PFAS-free finish. To maintain chemical protection (EN 13034), the clothing must be re-impregnated after washing.

Show fabric test result Hide fabric test result

EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 C2 (884+920)
EN ISO 11611 class 2
EN 61482-1-2:2014 APC 1
EN IEC 61482-1-1:2019, ELIM: 18 cal/cm², ATPV: 20 cal/cm²
LOI 29,5%
EN 1149-3
EN 13034 (only for acid and alcaline)
EN ISO 20471 for fluorescent yellow
EN 13758-1 UPF 50+


Complementary products

Explore complementary products in other product groups.